NBR/EPDM HOSES
can be used as “PushLock” push-in hoses
NBR/EPDM hoses for mold tempering
- Suitable for standard hose nozzles and PushLock hose nozzles
- Kink resistant and bendable in cold and hot water
- Temperature resistance NBR hose up to +90°C
- Temperature resistance EPDM hose up to +130°C
- Pressure: max. 28 bar
- Diameter: 10 mm (3/8″), 12/13 mm (½”), other sizes on request
- Colors: blue, red, black
- Surfaces: rough (matte), smooth (glossy)
PushLock principle
- quick and tool-free assembly
- assembly without further aids, clamps, hose clamps, etc.
- higher working safety and for tight spaces, as no protruding contours
- PushLock hose nozzle required
WF HOSES
Temperature control hoses for the high temperature range
PFA-Well-Flex-Hoses with Fitting
- Made from PFA, Glass cloth and Stainless Steel Flexible Braided Wire
- Operating Temperature:-54°C bis +200°C /Mind. Bend Radius 25 mm (with WF10)
- Working Pressure 65bar (with WF10) / Burst Pressure 260bar (with WF10)
- Swivel Nuts on both ends with 3/8″-Thread, optional available with 1/2″/3/4″/M12x1,5/M14x1,5/M16x1,5 oder M18x1,5-Thread
- Available upon from 200mm
PFA-Well-Flex-Hoses with Fitting and Insulation
- like above, however with crimped insulation hose
- available upon from 250mm
PFA-Well-Flex-Hoses -available by the meter-
- For self-fitting with the fitting kits DKL/DKR
- Available sizes: WF06/WF08/WF10/WF13/WF16/WF20/WF25
Fittings Kit and Holder by Stainless Steel A2 for PFA-Well-Flex-Hoses
- DKL = metrical, optional straight – 45° – 90°
- DKR = inch, optional straight – 45° – 90°
Fittings Kit And Holder by Galvanized Steel for PFA-Well-Flex-Hoses
- DKL = metrical, optional straight – 45° – 90°
- DKR = inch, optional straight – 45° – 90°
Fittings Kit and Galvanized Steel Holder; Stainless Steel Nipples for PFA-Well-Flex-Hoses
- DKL = metrical, optional straight – 45° – 90°
- DKR = inch, optional straight – 45° – 90°
HOSE ACCESSORIES
for work and process safety
Insulating hoses
- Energy efficiency by preventing heat loss
- Touch protection to prevent accidents from burns
- Firmly pressed with our corrugated flex hoses
- as yard goods for retrofitting
- Glass silk with silicone foam coating
- High insulation due to low thermal conductivity (= 0.15 W/m*K)
- Temperature resistance: -40°C to +250°C
- Colors: blue, red
- Internal diameter: 13 / 18 / 22 / 30 / 40 mm
Wear and abrasion protection for hoses
- For easy mounting and retrofitting
- Prevents abrasion and serves as edge/burst protection
- Avoid costly downtime due to leaks
- Suitable for hose assemblies and hose assemblies
- Material: high-quality polyester fabric (abrasion resistance according to ISO 6945 & burst protection according to ISO 3457)
- Temperature resistance: -40°C to +100°C
- 11 sizes available Ø 20 – 90 mm
- Adaptable to desired length
- Can be ordered by the meter
Hose cutter for elastomer hoses
- Part number: FL7778
- For easy, fast and safe cutting of elastomer hoses
- Ideally suitable for our NBR/EPDM hoses
- Right-angled and burr-free cutting edge
- Risk of injury is minimized
- Manual pliers
- For diameters up to 28 mm
- Replaceable cutting blade
- Replacement blade (item no.: FL7779)
Color coding for hoses
“Small effort – big effect!” – Prevent potential sources of error and rule out confusion when connecting the temperature control hoses. This will increase process reliability in your injection molding production.
- Color rings for identification and marking
- For easy plug-on
- Variably applicable in diameter
- With numbering
- Available in 9 colors: blue, brown, yellow, green, orange, red, black, white, purple
- Temperature resistant up to +80°C
- Matching our color discs for clutch marking